Filter
Top Products
1
slotShow
1-407
Telnet Commands
Operands None
Example
To display a blade inventory and status:
switch:admin> slotshow
Slot Blade Type ID Status
---------------------------------
1 UNKNOWN VACANT
2 SW BLADE 2 ENABLED
3 UNKNOWN VACANT
4 SW BLADE 2 ENABLED
5 CP BLADE 1 ENABLED
6 CP BLADE 1 ENABLED
7 SW BLADE 2 ENABLED
8 UNKNOWN VACANT
9 SW BLADE 2 ENABLED
10 UNKNOWN VACANT
switch:admin>
Status
The status of the blade:
◆ VA C A NT
The slot is empty.
◆ INSERTED, NOT POWERED ON
The blade is present in the slot but is turned
off.
◆ DIAG RUNNING POST1
The blade is present, powered on, and running
the post initialization power-on self tests.
◆ DIAG RUNNING POST2
The blade is present, powered on, and running
the POST (power-on self tests).
◆ ENABLED
The blade is on and enabled.
◆ DISABLED
The blade is powered on but disabled.
◆ FAULTY
The blade is faulty because an error was
detected.
◆ UNKNOWN
The blade is inserted but its state cannot be
determined.