Filter
Top Products
1
qloopShow
1-383
Telnet Commands
qloopShow
Display QuickLoop information.
EMC does not support this command.
Syntax qloopShow [pattern][, mode]
Availability All users
Description Use this command to display QuickLoop configuration information.
If no parameters are specified, all zone configuration information
(defined and enabled) is displayed. See
cfgShow for a description of
this display.
If a parameter is specified, it is used as a pattern to match QuickLoop
names; those that match in the defined configuration are displayed.
This command changes the defined configuration. For the change to
be preserved across switch reboots, it must be saved to nonvolatile
memory using the
cfgSave command. For the change to become
effective, an appropriate zone configuration must be enabled using
the
cfgEnable command.
This command requires a Zoning license.