EMC DS-32B2 Switch User Manual


 
1
configDefault
1-79
Telnet Commands
configDefault
Restore system configuration to default settings.
Syntax
configDefault
Availability Admin
Description Use this command to reset system configuration to default values.
All configuration parameters, with the following exceptions, are reset
to default values:
Ethernet MAC address, IP address, and subnetmask
IP gateway address
License keys
OEM customization
SNMP configuration
System name
World Wide Name
Zoning configuration
Refer to the Configure command for more information on default values
for configuration parameters.
Do not execute this command on an enabled system; first disable the system
using the switchDisable command.
Some configuration parameters are cached by the system. To avoid
unexpected switch behavior, reboot the system after executing this
command.
Operands None
Example
To restore the system configuration to default values:
switch:admin> configDefault
Committing configuration...done.
See Also agtcfgDefault
configure
switchDisable
switchEnable