Filter
Top Products
1
switchDisable
1-433
Telnet Commands
switchDisable
Disable the switch.
Syntax
switchDisable
Availability Admin
Description Use this command to disable the switch. All Fibre Channel ports are
taken off line; if the switch was part of a fabric, the remaining
switches reconfigure.
The switch must be disabled before making configuration changes
(using
configure or configDefault) or before running many of the
diagnostic tests. All commands that require the switch to be disabled
send an error if invoked while the switch is enabled.
The switch does not need to be disabled before rebooting or
powering off.
As each port is disabled, the front-panel LED changes to a slow
flashing yellow.
Operands None
Example
To disable the switch:
switch:admin> switchDisable
See Also switchEnable
switchShow