1
portPerfShow
1-351
Telnet Commands
portPerfShow
Display port throughput performance in bytes, kilobytes, or
megabytes.
Syntax portPerfShow [interval]
Availability All users
Description Use this command to display throughput information for all ports on
the switch (8 or 16 columns depending on the switch model). One
output line is displayed per interval until ENTER, CONTROL-C, OR
CONTROL-D is entered.
Shown are the number of bytes received plus the number of
bytes transmitted per interval. Throughput numbers are shown as
either bytes, kilobytes (k), or megabytes (m).
Operand This command has the following operand:
Example
To display port throughput for an 16- port switch:
switch:admin> portPerfShow
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-----------------------------------------------------------------------------
0 0 0 0 0 0 0 76m 0 0 0 0 0 0 0 76m
96 0 96 0 0 96 0 76m 0 0 0 0 0 0 0 76m
0 0 0 0 0 0 0 76m 0 0 0 0 0 0 0 76m
To display port throughput for an ED-12000B:
switch:admin> portPerfShow
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
=============================================================================
slot 1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
slot 2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
See Also portStatsShow
interval
Specify the interval, in seconds, between each
sample. This operand is optional.