Filter
Top Products
1
1-312
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Operands This command has the following operands:
Example
To display the port end-to-end mask on blade 2, port 4:
switch:admin> perfShowPortEEMask 2/4
TxSID Domain: on
TxSID Area: on
TxSID ALPA: off
TxDID Domain: on
TxDID Area: on
TxDID ALPA: off
RxSID Domain: on
RxSID Area: on
RxSID ALPA: off
RxDID Domain: on
RxDID Area: on
RxDID ALPA: off
switch:admin>
See Also perfAddEEMonitor
perfDelEEMonitor
perfShowEEMonitor
perfSetPortEEMask
perfShowPortEEMask
slotnumber
Specify the slot number in an ED-12000B switch.
The slot number must be followed by a slash ( / )
and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch card,
there are 16 ports counted from the bottom 0 to
15. A particular port must be represented by both
slot number (1 through 4 or 7 through 10) and
port number (0 through 15).
This operand is not required for switches that do
not have blades.
portnumber
Specify the port number where you want to
display the end-to-end mask. Valid values for
port numer vary depending on the swtich type.
This operand is required.