Filter
Top Products
1
crossPortTest
1-101
Telnet Commands
Operands This command has the following operands:
passCount
Specify the number of times to execute this
test. The default value is 1. This operand is
optional.
lbmode
Select the loopback point for the test. By
default,
crossporttest uses cable loopback
as described above. However for debug
purposes you can select other loopback
modes as follows:
◆ 0 Cable Loopback
◆ 1 Port Loopback (loopback plugs)
◆ 2 External (series) loopback
◆ 3 Silkscreen loopback
◆ 4 Serial link wrapback
◆ 5 Internal (parallel) loopback