1
1-448
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
switchStatusPolicyShow
Display the policy parameters that determine the overall switch
status.
Syntax switchStatusPolicyShow
Availability All users
Description Use this command to view the current policy parameters set for the
switch. These policy parameters determine the number of failed or
nonoperational units allowed for each contributor before triggering a
status change in the switch.
The command will print the current parameters in a three-column
table format. The first column specifies the contributor; the second
column specifies the minimum number that contributes to the
DOWN/FAILED status; the third column specifies the minimum
number that contributes to the MARGINAL/WARNING status. The
default values for the policy parameters are as follows:
The policy parameters determine the number of failed or
nonoperational units for each contributor that trigger a status change
in the switch. For example, if the FaultyPorts DOWN parameter is set
to 3 and 3 ports fail in the switch, then the status of the switch
changes to DOWN.
Operands
None
Table 1-32 Contributor Value and Status
Contributor
Default Value for
DOWN Default Value for MARGINAL
FaultyPorts 1 0
MissingGBICs 0 0
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
PortStatus 0 0
sgroup ISLStatus 0 0