1
1-218
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
iodReset
Turn off the in-order delivery (IOD) option.
Syntax
iodReset
Availability Admin
Description Use this command to turn off the IOD option. The IOD option is
turned off by default. If the IOD option was turned on using
iodSet,
this command can be used to turn it off again. Setting the IOD option
to its default value will result in fast re-routing after a fabric topology
change.
This command may cause out-of-order delivery of frames during
fabric topology changes.
Operands None
Examples
To turn off the in-order delivery option:
switch:admin> iodshow
IOD is set
switch:admin> iodreset
done.
switch:admin> iodshow
IOD is not set
switch:admin>
See Also iodSet
iodShow