Filter
Top Products
1
ipAddrShow
1-225
Telnet Commands
Operands This command has the following operand:
Example
To display the IP addresses for logical switch number 0:
switch12000:admin> ipAddrShow 0
Ethernet IP Address: 192.168.166.147
Ethernet Subnetmask: 255.255.255.0
Fibre Channel IP Address: none
Fibre Channel Subnetmask: none
switch12000:admin>
See Also ipAddrSet
option
Specify the option you would like to view.
The option operand is not availabe in v3.0.
Valid option values for v4.0 are:
◆ Option 0 means display information for
switch0.
◆ Option 1 means display information for
switch1.
◆ Option 2 means display information for
cp0.
◆ Option 3 means display information for
cp1.
◆ option 4 means display information all
IP addresses in the system.