Filter
Top Products
1
1-264
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
nbrStateShow
Display FSPF neighbor’s state.
Syntax
nbrStateShow [slotnumber/][portnumber]
Availability All users
Description Use this command to display information about neighbors to the
local switch, or information about a specific neighbor if a port
number is supplied. A neighbor is a switch that is directly attached to
the local switch.
Table 1-17 shows the fields displayed:
Table 1-17 nbrStateShow Fields
Field Description
Local
Domain ID
Domain number of local switch
Local Port
E_Port (interface) on local switch.
Domain
Domain number of remote switch.
Remote Port
E_Port (interface) on remote switch.
State
State of the neighbor. The E_Port is used to
route frames only if the neighbor is in
NB_ST_FULL state.