Filter
Top Products
1
1-112
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
diagEnablePost
Enable POST execution at next reboot.
Syntax
diagEnablePost
Availability Admin
Description Use this command to enable power on self test (POST) execution at
the next switch reboot. This mode is saved in flash memory and
POST
remains enabled until it is disabled using the diagDisablePost
command.
Operands None
Example To enable the POST during future power ups:
switch:admin> diagEnablePost
Config update Succeeded
Post disable is now 0 (Enabled).
See Also diagHelp
diagDisablePost