1
perfClrAlpaCrc
1-293
Telnet Commands
perfClrAlpaCrc
Clear an ALPA device’s CRC count by the port and ALPA.
Syntax
perfClrAlpaCrc [slotnumber/]portnumber[, ALPA]
Availability Admin
Description Use this command to clear specific ALPA device's CRC error counter.
If the ALPA is provided as an operand, only the counters for that
device are reset; if no ALPA is specified this command clears the CRC
counters for all ALPA devices on the specified port.
This command requires a Performance Monitoring license.
Operands This command has the following operands:
slotnumber
Specify the slot number in an ED-12000B
switch. The slot number must be followed by a
slash ( / ) and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch
card, there are 16 ports counted from the
bottom 0 to 15. A particular port must be
represented by both slot number (1 through 4
or 7 through 10) and port number (0 through
15).
This operand is not required for switches that
do not have blades.
portnumber
Specify the port number where you want to
reset the CRC error counters. Valid values for
port numbers vary depending on the switch
type. This operand is required.
ALPA
Specify the ALPA address if you want to clear
the CRC error counter for a particular device.
This operand is optional.