Filter
Top Products
1
perfAddUserMonitor
1-285
Telnet Commands
Operands This command has the following operands:
slotnumber
Specify the slot number in an ED-12000B switch. The
slot number must be followed by a slash ( / ) and the
port number.
The ED-12000B has a total of 10 slots counted from 1
to 10. Slot number 5 and 6 are control processor
cards, and slot 1 through 4 and 7 through 10 are
switch cards. On each switch card, there are 16 ports
counted from the bottom 0 to 15. A particular port
must be represented by both slot number (1 through
4 or 7 through 10) and port number (0 through 15).
This operand is not required for switches that do not
have blades.
portnumber
Specify the port number where you want to add a
user defined monitor. Valid values for port numbers
vary depending on the switch type. This operand is
required.