Filter
Top Products
1
myid
1-261
Telnet Commands
myid
Display the current login session details.
Syntax
myid
Availability Admin
Description Use this command to display the status of the system and the login
session details. The status shows whether the system is Redundant,
Non-Redundant, or Unknown.
The login session gives details of the following:
◆ Which CP/Switch (or console/serial port) was used to log in
◆ The IP address of the current login session for Telnet or the name
of the current Console port or the serial port (if modem login
used).
◆ The current CP’s mode (Active , Standby ,or Unknown)
◆ The current system status (Redundant, Non-Redundant ,or
Unknown).
Operands None
Example
To display current login information:
switch:admin> myid
Current Switch: switch0
Session Detail: Console Port (/dev/ttyS0) Active Redundant
See Also version