Filter
Top Products
1
portCfgSpeed
1-327
Telnet Commands
Example To configure the speed of blade 2, port 5 to 2 Gb/s:
switch:admin> portCfgSpeed 2/5, 2
done.
See Also switchCfgSpeed
portShow
speed_level
Specify the speed of a port. This operand is
optional. Valid values are one of the following:
0 Auto-sensing mode. The port automatically
configures for the highest speed.
1 1 Gb/s mode. The port will be at fixed speed of 1
Gb/s.
2 2 Gb/s mode. The port will be at fixed speed of 2
Gb/s.