Filter
Top Products
1
1-162
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Operands This command has the following operands:
Diagnostics When it detects failure(s), the subtest may report one or more of the
following error messages:
DIAG-FLTINIT
DIAG-FLTXMIT
DIAG-FLTRCV
DIAG-ACTTEST
DIAG-NUMTEST
7 Zone A match and ALPA match
8 Zone B match and ALPA match
9 Zone A&B match and ALPA match
10 Zone A|B match and ALPA match
11 Zone A|B match and ALPA match
Table 1-10 Filtering Conditions (continued)
Number Filter Definition
-passcnt
passcnt
Specify the number of times to execute this test. The
default value is 1. This operand is optional.
-txports
list
Specify the user port number(s) to perform this test. All
user ports are set in default.
-scamoff
offset
Specify the program location to write SCAM test data in
SCAM memory. The default value is 0. The maximum
offset number is set if the specified number is larger than
limit.
-dcamoff
offset
Specify the program location to write DCAM test data in
DCAM memory. The default value is 0. The maximum
offset number is set if the specified number is larger than
limit.
-fdefoff
offset
Specify the program location to write filter test definition
data in filter definition memory. The default value is 0.
The maximum offset number is set if the specified
number is larger than limit.