Filter
Top Products
1
cfgRemove
1-61
Telnet Commands
cfgRemove
Remove a member from a zone configuration.
Syntax
cfgRemove "cfgName", "member; member"
Availability Admin
Description Use this command to remove a member from an existing zone
configuration.
The member list is located by an exact string match, therefore, it is
important to maintain the order when removing multiple members.
For example, if a zone configuration contains cfg2; cfg3; cfg4 then
removing cfg3; cfg4 succeeds, but removing cfg4; cfg3 fails.
If all members are removed, the zone configuration is deleted.
This command requires a Zoning License.
Operands The following operands are required:
"cfgName"
Specify a name of a zone configuration, in
quotation marks.
"member"
Specify a member or list of members to be
deleted from the zone configuration, in
quotation marks, separated by semicolons.
Members can be specified in one or more of the
following methods:
◆ Zone names
◆ QuickLoop names
◆ FA (Fabric Assist) zone names
This operand is required.