Filter
Top Products
1
portShow
1-359
Telnet Commands
Operands This command has the following operands:
Overrun
Buffer overrun interrupts.
Suspended
Transmission suspended interrupts.
Parity_err
Real Tx data parity error.
2ndary_parity_err
Secondary Tx data parity error. These are not
real Tx data parity errors but rather forced by
the ASIC due to certain central memory errors
so that the transmitter will abort the frame.
This field will only be displayed when there
are errors.
Table 1-28 PortShow Display Fields (continued)
Field Description
slotnumber
Specify the slot number in an ED-12000B switch.
The slot number must be followed by a slash ( / )
and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch
card, there are 16 ports counted from the bottom
0 to 15. A particular port must be represented by
both slot number (1 through 4 or 7 through 10)
and port number (0 through 15).
This operand is not required for switches that do
not have blades.
portnumber
Specify the port number to be displayed. Valid
values for port number vary depending on the
switch type. This operand is required.