Filter
Top Products
1
1-394
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
setmfgmode
Enable or disable Mfg mode.
Syntax
setmfgmode [mode | -show]
Availability Admin
Description Use this command to enable or disable Mfg mode. The mode is saved
in non-volatile memory and stays in that mode until the next
execution of
setmfgmode.
The mode becomes active as soon as this command is executed. It
does not require a reboot to take effect.
When enabled, Mfg mode modifies the behavior of the diagnostic test
methods and post scripts. The exact behavior varies but most
commonly consists of enabling extra manufacturing specific tests and
data patterns.
Operands This command has the following operands:
If no operand is specified the current value is displayed.
Example
To set Mfg mode:
switch:admin> setmfgmode
Mfg Mode is 0 (Disabled).
switch:admin> setmfgmode 1
Config update Succeeded
Mfg Mode is now 1 (Enabled).
switch:admin>
See Also diagHelp
mode
Specify 1 to enable Mfg mode or 0 to disable Mfg
mode. This operand is optional.
-show
Specify this operand to display the current mode
setting. This operand is optional.