Filter
Top Products
1
ptregshow
1-373
Telnet Commands
ptregshow
Display ASIC port registers.
Syntax
ptpropshow [slot]/port
Availability All Users
Description Use this command to display the ASIC register contents for the
specified port. If the slot is not specified, then the slot specified with
setslot is used.
Operands This command has the following operands:
Example
To display the ASIC port registers for slot 8 port 1:
switch:admin> ptregshow 8/1
Looking for port 1 in path: /proc/fabos/blade/8
Found file: /proc/fabos/blade/8/0/0/1/asic1/reg
Port Registers for slot: 8, port: 1
0xca637000: chip_id 0104 0xca637002: port_config 0001
0xca637004: did_vc_map 0000 0xca637008: int_mask 0000
0xca63700a: int_status 1020 0xca63700c: err_status 0003
0xca63700e: vc_config 00c0 0xca637010: buf_error 00000000
<output truncated>
See Also ptdatashow
ptphantomshow
ptpropshow
ptrouteshow
ptstatsshow
slot
Specify the slot number of the blade where you
want to view the ASIC register contents. This
operand is optional.
port
Specify the port within the blade to be displayed.
Valid values for port number vary depending on
switch type. This operand is required.