Filter
Top Products
1
1-474
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
uRouteShow
Display unicast routing information.
Syntax
uRouteShow [slotnumber/] [portnumber],[domainnumber]
Availability All users
Description Use this command to display the unicast routing information for a
port, as it is known by the FSPF path selection and routing task. The
routing information describes how a frame, that is received from a
port on the local switch, is to be routed to reach a destination switch.
If no operand is specified, this command displays routing
information for all active ports on the local switch, to all the domains
in the fabric.
When only slot number and port number are specified, this
command displays the routing information for the specified port to
all the domains connected to it.
When slot number, port number, and domain number are all
specified, this command only displays the routing information for the
specified port to the specified domain.
The information is displayed as shown in Table 1-35:
Table 1-35 uRouteShow Fields
Fields Description
Local
Domain ID:
Domain number of local switch.
In Port:
Port from which a frame is received.
Domain:
Destination domain of incoming frame.
Out Port:
Port to which incoming frame is to be forwarded.
Metric:
Cost of reaching the destination domain.