Filter
Top Products
1
nbrStateShow
1-265
Telnet Commands
Operands This command has the following operands:
Example
To display information about switches directly connected to the local
switch:
switch:admin> nbrStateShow 2/0
Local Domain ID: 15
Local Port Domain Remote Port State
------------------------------------------------------
-
2 13 13 NB_ST_FULL
6 13 9 NB_ST_FULL
7 13 8 NB_ST_FULL
13 3 7 NB_ST_FULL
See Also interfaceShow
slotnumber
Specify the slot number in an ED-12000B switch.
The slot number must be followed by a slash ( / )
and the port number.
The ED-12000B has a total of 10 slots counted from
1 to 10. Slot number 5 and 6 are control processor
cards, and slot 1 through 4 and 7 through 10 are
switch cards. On each switch card, there are 16
ports counted from the bottom 0 to 15. A
particular port must be represented by both slot
number (1 through 4 or 7 through 10) and port
number (0 through 15).
This operand is not required for switches that do
not have blades.
portnumber
Specify the port on the local switch that connects
to the neighbor being displayed. Valid values for
port number vary depending on the switch type.
This operand is optional.