Filter
Top Products
1
1-102
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
sp
Select the speed mode for the test. This
parameter is only used for 2 Gb/s capable
products where it controls the speed at
which each port is operated.
For 1 Gb/s only products it is ignored. The
exact operation of modes 3-6 depends upon
the loopback mode selected. When speed
modes 3-6 are used with cables, they must
be connected even to odd or the test will fail.
◆ 0 - set all ports’ speed for auto-negotiate
◆ 1 - set all ports’ speed to lock at 1 Gb/s
◆ 2 - set all ports’ speed to lock at 2 Gb/s
For lbMode = 0,1 the following speed modes
are available to test the speed negotiation:
◆ 3 - set all even ports' speed for
auto-negotiate, set all odd ports' speed
for 1 Gb/s.
◆ 4 - set all even ports' speed for
auto-negotiate, set all odd ports' speed
for 2 Gb/s.
◆ 5 - set all odd ports' speed for
auto-negotiate, set all even ports' speed
for 1 Gb/s.
◆ 6 - set all odd ports' speed for
auto-negotiate, set all even ports' speed
for 2 Gb/s.
For lbMode = 2,3 the following speed modes
are available to test FIFO underrun:
◆ 3,5 - set all even ports' speed for 2 Gb/s,
set all odd ports' speed for 1 Gb/s.
◆ 4,6 - set all even ports' speed for 1 Gb/s,
set all odd ports' speed for 2 Gb/s.