EMC DS-32B2 Switch User Manual


 
1
chipregshow
1-75
Telnet Commands
chipregshow
Display port registers of a given chip number.
Syntax
chipregshow [slot/]chip [filter]
Availability All users
Description Use this command to display the ASIC register contents for the
specified chip on the specified blade slot.
Operands This command has the following operands:
Example
To display the port registers of chip 1 on slot 9:
switch:admin> chipregshow 9/1
Looking for port 1 in path: /proc/fabos/blade/9
Found file: /proc/fabos/blade/9/0/1/7/asic1/reg
Port Registers for slot: 9, port: 1
0xcacaa000: chip_id 0104 0xcacaa002: port_config 0a3e
0xcacaa004: did_vc_map 0800 0xcacaa008: int_mask 064f
0xcacaa00a: int_status 1020 0xcacaa00c: err_status 0000
0xcacaa00e: vc_config 00c0 0xcac4a010: buf_error 00000000
0xcacaa014: mem_bufline 00080008 0xcacaa018: mem_ctl 1954
<output truncated>
See Also chippropshow
ptregshow
minisregshow
slot
Specify the slot number of the blade that
houses the chip you want to test.
chip
Specify the index of the chip within the
blade to be displayed.
filter
Specify a filter string.