Filter
Top Products
1
ifModeShow
1-209
Telnet Commands
ifModeShow
Display the link operating mode for a network interface.
Syntax
ifModeShow ["eth0"]
Availability All users
Description Use this command to display the link operating mode for a network
interface.
Operand This command has the following operand:
Example
To display the link operating mode for the fei0 Ethernet interface:
switch:admin> ifModeShow "eth0"
Link mode: Auto-negotiation, 10baseT-HD, link ok
See Also ifModeSet
ifShow
eth0
Specify the Ethernet interface in quotation
marks. For example, "eth0", where eth is the
ethernet network interface, and 0 is the
physical unit. The Ethernet interface is the
only interface that can be modified on the
ED-12000B.