EMC DS-32B2 Switch User Manual


 
1
switchStatusPolicySet
1-445
Telnet Commands
switchStatusPolicySet
Set the policy parameters that determine the overall switch status.
Syntax
switchStatusPolicySet
Availability Admin
Description Use this command to set the policy parameters for calculating the
overall status of the switch enclosure. The policy parameter values
determine how many failed or faulty units of each contributor are
allowed before triggering a status change in the switch from
HEALTHY to MARGINAL or DOWN.
The command will print the current parameters in a three column
table format. The first column specifies the contributor; the second
column specifies the minimum number that contributes to the
DOWN/FAILED status; the third column specifies the minimum
number that contributes to the MARGINAL/WARNING status. This
command then prompts the user to change the values for each policy
parameter. The default values for the policy parameters are as
follows:
Any single contributor can force the overall status of the switch to
MARGINAL or DOWN. For example, assuming that the switch
contributor values are set to the default values, if there is one faulty
port in a switch, then this contributor would set the overall switch
Table 1-31 Contributor Value and Status
Contributor
Default Value for
DOWN Default Value for MARGINAL
FaultyPorts 2 1
MissingGBICs 0 0
PowerSupplies 3 1
Temperatures 2 1
Fans 2 1
PortStatus 0 0
sgroup ISLStatus 2 1