Filter
Top Products
Software Upgrade ColorQube™ 9201/9202/9203
22-2 System Administrator Guide
Upgrade via Internet Services
Note
This procedure will delete any current jobs in the device print queue and prevent further jobs from
printing until the upgrade has completed. If you wish to preserve these jobs, allow them to complete
before upgrading your software.
All configured network settings and installed options will be retained by the device after the Software
Upgrade process.
Information Checklist
Before starting the installation procedure, please ensure the following items is available or has been
performed:
• Obtain the new software upgrade file for your device from the www.xerox.com website or from your
Xerox Customer Support Representative.
The upgrade file will have an extension of .dlm (dynamically loaded module). Download the upgrade file
to a local or network drive. You will be able to delete the file after the upgrade procedure.
It is important to obtain the correct upgrade file for your particular model of device.
System Software Version
To determine which model of device you have, check the system software version.
At the Device
1. Press the [Machine Status] button.
2. View the Software Version.
Note
TCP/IP and HTTP protocols must be enabled on the device so that the device can be accessed via the
web browser.
Procedure
1. At your Workstation, open the web browser and enter the IP Address of the device in the Address bar,
and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Machine Software] link.
7. Click on the [Upgrades] in the directory tree.
8. Check to enable [Upgrades] box.
9. Click on the [Apply] button.
10. Click on the [Manual Upgrade] in the directory tree.
11. In the Manual Upgrade area, click on [Browse] to locate the software upgrade file [.dlm] obtained
earlier.