Filter
Top Products
Network Installation ColorQube™ 9201/9202/9203
5-32 System Administrator Guide
• Select [Remote Printer is on a BSD System] and click [OK] to complete form.
9. Click [Yes] at the Configure HP UX Printers Subpanel screen. This screen may be obscured by Add
Remote Printer/Plotter form.
10. Select [File: Exit].
11. Select [File: Exit Sam].
12. Type [exit] to exit super user mode.
13. Test the queue created. Type the command [lp -d queuename /etc/hosts].
tty Method
Follow the steps below to use the HP System Administrator Manager (SAM) GUI (Graphical User Interface).
Note
Refer to the HP-UX documentation for additional information on using the System Administrator
Manager (SAM).
1. Open a command window on the desktop. From the command prompt (#), enter the information below.
Remember that UNIX commands are case-sensitive.
2. Type [su] to become super user
3. Type [sh] to run the Bourne shell.
4. Type [lpshut] to stop the print service.
5. Create the print queue by typing (on the same command line): [lpadmin -pqueuename -v/dev/null -
mrmodel -ocmrcmodel -osmrsmodel -ob3 -orc -ormhostname -orplp]
Where queuename is the name of the queue being created and hostname is the machine hostname
from the /etc/hosts file.
6. Type [lpsched] to start the print service.
7. Type [enable queuename] to enable the queue to print to the machine.
8. Type [accept queuename] to the queue accepting jobs from the HP-UX workstation.
9. Type [exit] to exit the Bourne shell and then [exit] to exit super user mode.
10. Test the queue created. Type the command [lp -d queuename /etc/hosts].
11. Verify that the job is printed at the device.
Solaris 2.x
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed:
• Ensure that the correct IP Address is being used for the machine. To verify this, print a Configuration
Report from the machine.
At the Device
a. Press the <Machine Status> button on the device.
b. Touch the [Machine Information] tab.
c. Touch [Information Pages].
d. Touch [Configuration Report].
e. Touch [Print], then touch [Close].