ColorQube™ 9201/9202/9203 Network Installation
System Administrator Guide 5-31
UNIX
HP-UX Client (Version 10.x)
HP-UX workstations require specific installation steps to communicate with the machine. The machine is a
BSD-style UNIX printer, whereas HP-UX is a System Vstyle UNIX. Use the correct case when entering
commands; UNIX commands are case sensitive.
Note
All UNIX commands are case-sensitive, so enter the commands exactly as they are written.
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed:
• Ensure that the correct IP Address is being used for the machine. To verify this, print a Configuration
Report from the device.
At the Device
• Press the <Machine Status> button on the device.
•Touch the [Machine Information] tab.
•Touch [Information Pages].
•Touch [Configuration Report].
•Touch [Print], then touch [Close].
The Configuration Report will print. Verify the addresses detailed under TCP/IP Settings.
• Ensure the machine is connected to the network with Ethernet cabling.
• Ensure you can PING the machine IP address from the UNIX workstation
Configure the Client
1. Add the machine hostname to the etc/hosts file on the HP-UX workstation or DNS server.
2. Ensure that you can ping the machine from the HP-UX workstation, using the hostname found in the
/etc/hosts file.
3. Use either the GUI method or the tty Method as follows:
GUI Method
1. Open a command window from the desktop.
2. Type [su] to become super user.
3. Type [sam] to start the System Administrator Manager (SAM).
4. Select the [Printers and Plotters] icon.
5. Select [lp] spooler.
6. Select [Printers and Plotters].
7. Select [Actions: Add Remote Printer/Plotter...].
8. Enter the following information into the Add Remote Printer/Plotter form:
• [Printer Name: printer name]. Where printer name is the name of the queue being created.
• [Remote System Name: hostname]. Where hostname is the machine hostname from the /etc/
hosts file.