Filter
Top Products
Network Installation ColorQube™ 9201/9202/9203
5-10 System Administrator Guide
15. Click on the [OK] button, when you see the window that says “Properties have been successfully
modified”.
SNMP
Allows you to configure the following options when accessing the device via SNMP.
SNMP (Simple Network Management Protocol) settings can be configured via Internet Services. You can also
enable or disable Authentication Failure Generic Traps on the device. SNMPv3 can be enabled to create an
encrypted channel for secure device management.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address bar,
and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocols] link.
7. Select [SNMP] in the directory tree.
Configure SNMP v1/v2c
Note
For security purposes, Xerox recommends that the administrator changes the SNMP v1/V2c public/
private community strings from their default string names to random string names.
8. Check to ensure the [Enable SNMP v1/v2c Protocols] box is selected.
9. Click on the [Edit SNMP v1/v2c Properties] button.
10. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
11. Click on the [Login] button.
12. Enter a name for the [GET Community Name]. The default is public.
13. Enter a name for the [SET Community Name]. The default is private.
Note
Changes made to the GET or SET community names for this device will require corresponding GET or
SET community name changes for each application which uses the SNMP protocol to communicate with
this device (for example, Xerox PrinterMap, Xerox CentreWare, any 3rd party network management
applications).
14. Enter a name for the default [TRAP Community Name]. The default is SNMP_trap.
Note
The Default TRAP community name is used to specify the default community name for all traps
generated by this device. The Default TRAP community name can be overridden by the TRAP
community name specified for each individual TRAP destination address. The TRAP community name
for one address may not be the same TRAP community name specified for another address.
15. Click on the [Apply] button to accept the changes.