Filter
Top Products
ColorQube™ 9201/9202/9203 Network Installation
System Administrator Guide 5-29
Lan Attachment: *IP
Port Number: 9100
Online at IPL: *yes
Font Identifier: 11
Form Feed *autocut
Note
For some versions of AS400, the default may match some of these parameters.
3. Leave all other parameters at the default value, press [Enter], and enter the following parameters:
Activation Timer: 170
Inactivity Timer: *sec15
Host Print Transform: *yes
4. Press [Enter] to continue, and enter the following parameter: Manufacturer Type and Model: *hp5si
5. Leave the remaining parameters set to their default values and press [Enter] to continue. Enter the
following parameters: Remote Location: Enter the IP address of the printer.
User defined options: *IBMSHRCNN
System driver program: *IBMSNMPDRV
6. Leave all other options set to the default values and press [Enter]. A message indicates that you created
the device Xerox printer.
7. Power on the device and start a print writer. Then place a spool file in the appropriate queue to test the
printer.
AS400 Printing using LPR (CRTOUTQ) - Optional
Creating a remote queue (LPR) on the AS400
1. At the command line, issue CRTOUTQ and press F4, then F9 for additional parameters. The setup is as
follows:
Note
ONLY CHANGE THE PARAMETERS IN BOLD.
• Output queue: queue name
•Library: Library name
• Maximum spooled file size
•Number of pages: *NONE
•Starting time: Time
•Ending time: Time
• Order of files on queue: *FIFO
• Remote system: *INTNETADR
• Remote printer queue: virtual printer name**
Note
The queue for ColorQube should be lp (lower case L and P).
• Writers to autostart: 1
• Queue for writer messages: QSYSOPR
•Library: *LIBL
• Connection type: *IP
• Destination type: *OTHER