Filter
Top Products
snmp-server enable traps stpmode
SFTOS Command Reference for the S2410, Version 2.4.1.0 101
snmp-server enable traps stpmode
This command enables the sending of new root traps and topology change notification traps.
Syntax
[no] snmp-server enable traps stpmode
The no version of this command disables the sending of new root traps and topology change
notification traps.
Default
enabled
Mode
Global Config
snmp-server enable trap violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Syntax
[no] snmp-server enable trap violation
The no version of this command disables the sending of new violation traps.
Default
Disabled
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
Related
Commands
snmp-server traps enable
This command enables the Authentication traps.
Syntax
[no] snmp-server traps enable
The no version of this command disables the Authentication traps.
Default
enabled
Mode
Global Config
Version 2.3 Added Interface Range mode.
interface range Defines an interface range and accesses the Interface Range mode
interface
Identifies an interface and enters the Interface Config mode.