Filter
Top Products
230 GARP, GVRP, and GMRP Commands
show gvrp configuration
Example
Figure 50 show gvrp configuration Command Output Example
Interface
Valid unit, slot and port number separated by forward slashes.
Join Timer—Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is
an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100
centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer—Specifies the period of time to wait after receiving an unregister request for an attribute
before deleting the attribute. Current attributes are a VLAN or multicast group. This may be considered
a buffer time for another station to assert registration for the same attribute in order to maintain
uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis.
Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60
centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
LeaveAll Timer—This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to
maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. The
Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime.
Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
Port GMRP Mode—Indicates the GMRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The
factory default is disabled.
Port GVRP Mode—Indicates the GVRP administrative mode for the port. It may be enabled or disabled.
If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory
default is disabled.
(Force10_S50) #show gvrp configuration 0/1
Join Leave LeaveAll Port
Interface Timer Timer Timer GVRP Mode
(centisecs) (centisecs) (centisecs)
----------- ----------- ----------- ----------- -----------
0/1 20 60 1000 Disabled
Force10-S50 #show gvrp configuration all
Join Leave LeaveAll Port
Interface Timer Timer Timer GVRP Mode
(centisecs) (centisecs) (centisecs)
----------- ----------- ----------- ----------- -----------
0/1 20 60 1000 Disabled
0/2 20 60 1000 Disabled
0/3 20 60 1000 Disabled
0/4 20 60 1000 Disabled
0/5 20 60 1000 Disabled
0/6 20 60 1000 Disabled
0/7 20 60 1000 Disabled
0/8 20 60 1000 Disabled
0/9 20 60 1000 Disabled
0/10 20 60 1000 Disabled
!----------output truncated---------!