Filter
Top Products
90 System Management Commands
show telnet
The no version of this command sets the outbound Telnet session timeout value to the
default.
Default
1 (minute)
Mode
Line Config
show telnet
This command displays the current outbound telnet settings.
Syntax
show telnet
Modes
Privileged Exec and User Exec
Outbound Telnet Login Timeout (in minutes)—Indicates the number of minutes an outbound telnet
session is allowed to remain inactive before being logged off. A value of 0, which is the default, results in
no timeout.
Maximum Number of Outbound Telnet Sessions—Indicates the number of simultaneous outbound
telnet connections allowed.
Allow New Outbound Telnet Sessions—Indicates whether outbound telnet sessions will be allowed.
telnet
This command establishes a new outbound Telnet connection to a remote host. The host value
must be a valid IP address. Valid values for port should be a valid decimal integer in the range
of 0 to 65535, where the default value is 23. If [debug] is used, the current telnet options
enabled is displayed. The optional line parameter sets the outbound telnet operational mode
as ‘linemode’, where by default, the operational mode is ‘character mode’. The noecho option
disables local echo.
Syntax
telnet host [port] [debug] [line] [noecho]
Modes
Privileged Exec and User Exec
telnetcon timeout
Command
History
Version 2.3 Modified: Changed to ip telnet timeout.