Filter
Top Products
encapsulation (VLAN)
SFTOS Command Reference for the S2410, Version 2.4.1.0 123
encapsulation (VLAN)
This command configures the link layer encapsulation type for the packet within the VLAN.
Acceptable encapsulation types are Ethernet and SNAP.
Syntax
encapsulation {ethernet | snap}
Default
ethernet
Mode
Interface VLAN
Restrictions—Routed frames are always Ethernet-encapsulated when a frame is routed to a VLAN.
Command
History
Related
Commands
interface vlan
This command creates a new VLAN if the identified VLAN ID does not already exist, or else
the command selects an existing VLAN. Then, in either case, the command invokes the
Interface VLAN mode, in which you have access to VLAN configuration commands for the
specified VLAN.
Syntax
interface vlan vlanid
The vlanid is a valid VLAN identification number (ID 1 is reserved for the default VLAN).
VLAN range is 2-3965.
The
no version of this command deletes an existing VLAN.
Default
None
Mode
Global Config
Command
History
show interfaces Displays information, including the description, about a selected interface.
show running-config Display/capture the current setting of different protocol packages supported
on the switch.
Version 2.3 Introduced
interface vlan Creates a VLAN, assigns it an ID and then enters the Interface VLAN mode
Version 2.3
Introduced. Replaces vlan database and
vlan commands.