Filter
Top Products
protocol group
SFTOS Command Reference for the S2410, Version 2.4.1.0 127
protocol group
This command attaches a group ID to the selected VLAN. A group can only be associated
with one VLAN at a time. However, the VLAN association can be changed. The referenced
VLAN should be created prior to the creation of the protocol-based VLAN, except when
GVRP is expected to create the VLAN.
Syntax
[no] protocol group groupid
The no version of this command removes the group ID from this VLAN.
Default
None
Mode
Interface VLAN
Command
History
Related
Commands
protocol vlan group
This command adds the physical unit/slot/port interface to the protocol-based VLAN
identified by
groupid. A group may have more than one interface associated with it. Each
interface and protocol combination can only be associated with one group. If adding an
interface to a group causes any conflicts with protocols currently associated with the group,
this command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN
except when GVRP is expected to create the VLAN.
The
no version of this command removes the interface from this protocol-based VLAN
group that is identified by this
groupid.
Syntax
[no] protocol vlan group groupid
Default
None
Mode
Global Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt,
such as (conf-if-range-vlan 10-20)#.
Version 2.3
Modified: Removed
vlanid parameter and changed mode from VLAN database to
Interface VLAN.
interface vlan Configure a VLAN and enter Interface VLAN mode.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports