Filter
Top Products
108 System Configuration Commands
interface
interface
This command accesses the Interface Config mode for a designated logical or physical
interface. The Interface Config mode provides access to configuration commands for the
specified interface.
Syntax
interface unit/slot/port
The unit/slot/port is a valid physical or logical port number. Physical ports are numbered
#/0/1 through #/0/50. In contrast, logical port numbers contain a number in the slot position
and are defined by the system. The number in the slot position is a 1 when you create a LAG
(port channel).
The
no version of this command deletes the selected logical port.
Default
None
Mode
Global Config
interface range
This command groups a set of individual interfaces, a range of interfaces, or more than one
range of interfaces, to which subsequent configuration commands can be applied (bulk
configuration).
Syntax
interface range {ethernet range,range,... | port-channel range,range,... | vlan
range,range,
...}
Related
Commands
enable passwd Configure a password for the enable command.
configure Use this command to access the Global Config mode from the Exec
Privilege mode.
Related
Commands
interface range
Groups a set of individual interfaces, a range of interfaces, or more than one
range of interfaces, to which subsequent configuration commands can be
applied (bulk configuration)
interface vlan Creates a new VLAN and accesses the Interface VLAN mode for it, or
selects an existing VLAN and accesses the Interface VLAN mode for it.