Filter
Top Products
140 System Configuration Commands
copy
• Event log (also called the error log or the persistent log) (nvram:errorlog)
• Buffered message log (also called the System log) (
nvram:log)
• startup configuration (
nvram:startup-config)
•trap log (
nvram:traplog)
• See also copy (clibanner).
Specify a URL for the destination in this form:
copy nvram:clibanner tftp://tftp_server_ip_address/path/filename
copy nvram:errorlog tftp://tftp_server_ip_address/ path/filename
copy nvram:log tftp://tftp_server_ip_address/path/filename
copy nvram:traplog tftp://tftp_server_ip_address/path/filename
copy nvram:script scriptname tftp://tftp_server_ip_address/path/filename
copy nvram:startup-config tftp://tftp_server_ip_address/path/filename
The copy command can also be used to download the following files:
• HTTP secure-server certificates (
sslpem-root, sslpem-server, sslpem-dhweak, or
sslpem-dhstrong)
• SSH key files (
sshkey-rsa, sshkey-rsa2, or sshkey-dsa)
• SFTOS system software (
system:image)
• startup configuration (
startup-config)
Download the startup configuration or code image by specifying the TFTP source as a URL
and the destination as either
nvram:startup-config or system:image, respectively.
The command can also be used to the save the running configuration to NVRAM by
specifying the source as
system:running-config and the destination as
nvram:startup-config.
The following commands download to the switch (source specified first):
copy tftp://tftp_server_ip_address/path/filename nvram:clibanner
copy tftp://tftp_server_ip_address/path/filename nvram:script
copy tftp://tftp_server_ip_address/path/filename nvram:sslpem-root
copy tftp://tftp_server_ip_address/path/filename nvram:sslpem-server
copy tftp://tftp_server_ip_address/path/filename nvram:sslpem-dhweak
copy tftp://tftp_server_ip_address/path/filename nvram:sslpem-dhstrong
copy tftp://tftp_server_ip_address/path/filename nvram:sshkey-rsa1
copy tftp://tftp_server_ip_address/path/filename nvram:sshkey-rsa2
copy tftp://tftp_server_ip_address/path/filename nvram:sshkey-dsa
copy tftp://tftp_server_ip_address/path/filename nvram:startup-config
copy tftp://tftp_server_ip_address/path/filename system:image
Note: You can use the command
copy tftp //tftp_server_ip_address/path/filename nvram:startup-config
to copy either a binary file or a text file to the startup-config file. The result is a text file.