Filter
Top Products
SFTOS Command Reference for the S2410, Version 2.4.1.0 203
These commands configure the Dynamic Host Configuration Protocol (DHCP) Server
parameters and address pools.
The following commands are covered in this chapter:
• bootfile on page 204
• clear ip dhcp binding on page 204
• clear ip dhcp server statistics on page 204
• clear ip dhcp conflict on page 205
• client-identifier on page 205
• client-name on page 205
• default-router on page 206
• dns-server on page 206
• domain-name on page 206
• hardware-address on page 207
• host on page 207
• ip dhcp bootp automatic on page 208
• ip dhcp conflict logging on page 208
• ip dhcp excluded-address on page 208
• ip dhcp ping packets on page 209
• ip dhcp pool on page 209
• lease on page 209
• network on page 210
• netbios-name-server on page 210
• netbios-node-type on page 210
• next-server on page 211
• option on page 211
• service dhcp on page 212
• show ip dhcp binding on page 212
• show ip dhcp global configuration on page 213
• show ip dhcp pool configuration on page 213
• show ip dhcp server statistics on page 214
• show ip dhcp conflict on page 214
Chapter 10 DHCP Server Commands