Filter
Top Products
port lacptimeout (interface)
SFTOS Command Reference for the S2410, Version 2.4.1.0 255
The no version of this command removes the Link Aggregation Control Protocol (LACP)
timeout on all ports.
Syntax
[no] port lacptimeout {short all | long all}
Parameters
Mode
Global Config
Related
Commands
port lacptimeout (interface)
This command sets the Link Aggregation Control Protocol (LACP) timeout on the selected
port.
The
no version of this command removes the Link Aggregation Control Protocol (LACP)
timeout on the selected port.
Syntax
[no] port lacptimeout {short | long}
Parameters
Mode
Interface Config; Interface Range
Command
History
Related
Commands
show port-channel brief
This command displays the static capability of all port channels (LAGs) on the device as well
as a summary of individual port channels.
short all Enter short all to select the short timeout setting (3 seconds) for all ports.
long all Enter long all to select the long timeout setting (90 seconds) for all ports.
port lacptimeout (interface) Set the LACP timeout on the selected port(s).
short Enter short to select the short timeout setting (3 seconds) for the selected ports.
long Enter long to select the long timeout setting (90 seconds) for the selected ports.
Version 2.3 Added Interface Range mode.
interface Accesses the Interface Config mode for the selected interface.
interface range Defines an interface range and accesses the Interface Range mode
port lacptimeout (global) Set the Link Aggregation Control Protocol (LACP) timeout on ports.