Filter
Top Products
show port protocol
SFTOS Command Reference for the S2410, Version 2.4.1.0 119
show port protocol
This command displays the protocol-based VLAN information for either the entire system, or
for the indicated group.
Syntax
show port protocol groupid
Mode
Privileged Exec
Group Name—This field displays the group name of an entry in the protocol-based VLAN table.
Group ID—This field displays the group identifier of the protocol group.
Protocol(s)—This field indicates the type of protocol(s) for this group.
VLAN—This field indicates the VLAN associated with this protocol group.
Interface(s)—This field lists the
unit/slot/port interface(s) that are associated with this protocol
group.
shutdown (Interface)
This command disables a port.
The
no version of this command enables a port.
Syntax
[no] shutdown
Default
enabled
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
shutdown all
This command disables all ports.
The
no version of this command enables all ports.
Version 2.3 Added Interface Range mode.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
interface Identifies an interface and enters the Interface Config mode.