Filter
Top Products
128 System Configuration Commands
protocol vlan group all
Command
History
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by
groupid. A group may have more than one interface associated with it. Each interface and
protocol combination can only be associated with one group. If adding an interface to a group
causes any conflicts with protocols currently associated with the group, this command will
fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN
except when GVRP is expected to create the VLAN.
The
no version of this command removes all interfaces from this protocol-based VLAN
group that is identified by this
groupid.
Syntax
[no] protocol vlan group all groupid
Default
None
Mode
Global Config
pvid (VLAN)
Configure the VLAN ID for a specific port.
Mode
Interface VLAN
Command
History
Related
Commands
Version 2.3 Added Interface Range mode.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
Version 2.3
Introduced but deprecated in favor of
the tagged command
untagged Sets tagging to disabled for a specific port (or range of ports) in the selected VLAN.