Filter
Top Products
244 IGMP Snooping Commands
set igmp mcrtexpiretime (global)
set igmp mcrtexpiretime (global)
This command sets the Multicast router present expiration time for all routers.
Syntax
[no] set igmp mcrtexpiretime 0-3600
The variable is the amount of time in seconds that a switch will wait for a query to be received
on an interface before the interface is removed from the list of interfaces with multicast
routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout,
i.e. no expiration.
The
no igmp mcrtexpiretime command sets the Multicast Router Present Expiration time
on the interface to 0. A value of 0 indicates an infinite timeout, i.e. no expiration.
Default
0
Mode
Global Config
Related
Commands
set igmp mcrtexpiretime (interface)
Command
History
Related
Commands
igmp enable (interface) Enables IGMP Snooping on a selected interface.
igmp mcrtexpiretime
(interface)
Sets the Multicast router present expiration time on a selected interface.
show igmpsnooping Displays IGMP Snooping status information.
Version 2.3
Revised to
igmp mcrtexpiretime.
igmp enable (interface) Enables IGMP Snooping on a selected interface.
igmp mcrtexpiretime (interface) Sets the Multicast router present expiration time on a selected
interface.
set igmp mcrtexpiretime (global) Sets the Multicast router present expiration time globally.
show igmpsnooping Displays IGMP Snooping status information.