Filter
Top Products
sntp unicast client poll-interval
SFTOS Command Reference for the S2410, Version 2.4.1.0 217
sntp unicast client poll-interval
This command sets the poll interval for SNTP unicast clients in seconds as a power of two
where
poll-interval can be a value from 6 to 16.
Syntax
sntp unicast client poll-interval poll-interval
Use the no sntp unicast client poll-interval command to reset the poll interval for SNTP
unicast clients to its default.
Usage
You can also set the poll interval for an SNTP client with the sntp client port command.
Default
6
Mode
Global Config
sntp unicast client poll-timeout
This command sets the number of seconds to wait for an SNTP response when the client is
configured in unicast mode.
Syntax
sntp unicast client poll-timeout poll-timeout
The poll-timeout range is 1 to 30 seconds.
Use the
no sntp unicast client poll-timeout command to reset the poll timeout for SNTP
unicast clients to its default value.
Default
5 seconds
Mode
Global Config
sntp unicast client poll-retry
This command sets the number of times to retry a request to an SNTP server after the first
time-out before attempting to use the next configured server when configured in unicast mode.
Syntax
sntp unicast client poll-retry poll-retry
The poll-retry for SNTP unicast clients is an integer from 0 to 10 retries.
Use the
no sntp unicast client poll-retry version of this command to reset the poll retry
for SNTP unicast clients to its default value.