Filter
Top Products
130 System Configuration Commands
show vlan port
Q: “T” indicates that the port is tagged; “U” indicates untagged.
Ports:”E” for Ethernet, followed by the port numbers (unit/slot/port) in the VLAN
The output of the show vlan brief command is shown in the following example:
Example
Figure 32 Output of the show vlan brief Command
Description of the fields in the show vlan brief report:
VLAN: VLAN ID
Name: Assigned VLAN name
MAC Aging: Displayed in seconds
IP Address: IP Address assigned to the VLAN
Usage
Information
For the show vlan id vlan-id command, the output is shown in the following example:
Example
Figure 33 Output of the show vlan id Command
Description of the fields in the show vlan id report:
NUM: VLAN ID
Status: A VLAN is active only if the VLAN contains interfaces and those interfaces are operationally
up.
Q: (T) tagged or (U) untagged information
Ports: Speed - whether it is 10G, 1G or fast Ethernet interface and port number (unit/slot/port)
show vlan port
Display 802.1Q port parameters.
Syntax
show vlan port {unit/slot/port | all}
Force10#show vlan brief
VLAN Name MAC Aging IP Address
--------- ---------- -------- ----------------
1 abc 1800 unassigned
2 egf 1800 unassigned
3 sss 1800 unassigned
5 1800 unassigned
12 1800 unassigned
13 1800 unassigned
Force10#show vlan id 1
Codes: * - Default VLAN, G - GVRP VLANs
NUM Status Q Ports
* 1 Inactive U Gi 0/8,11