Filter
Top Products
166 Security Commands
port-security mac-address move
no port-security mac-address mac-address vid
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Syntax
port-security mac-address move
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
show port-security
This command displays the port-security settings for a particular interface or for the entire
system.
Syntax
show port-security [unit/slot/port | all]
Mode
Privileged Exec
When no parameter is entered, the one report field is:
Port Security Administration Mode—Port-locking mode for the entire system
When either the unit/slot/port or all parameter is entered, the report fields are:
Intf — Port number (unit/slot/port)
Interface Admin Mode — Port-locking mode for the Interface
Dynamic Limit—Maximum dynamically allocated MAC Addresses
Static Limit—Maximum statically allocated MAC Addresses
Violation Trap Mode—Whether violation traps are enabled
Version 2.3 Added Interface Range mode.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
Version 2.3 Added Interface Range mode.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode