Filter
Top Products
deleteport (global config)
SFTOS Command Reference for the S2410, Version 2.4.1.0 251
deleteport (global config)
This command deletes all configured ports from the LAG (port channel).
Syntax
deleteport {unit/slot/port} all
Mode
Global Config
Related
Commands
port-channel
This command creates a new LAG (port channel) and generates a logical unit/slot/port for
it.
Syntax
[no] port-channel name
The name field is an alphanumeric string that allows the dash '-' character.
Use
no port-channel unit/slot/port (slot/port format) to delete the designated LAG.
Mode
Global Config
Related
Commands
show port-channel Display the configured LAG names and their IDs. The interface number is
specified in logical slot/port format, which displays one (1) as the slot number;
the port number is a sequential integer, based on existing LAG numbers when
the new LAG is created.
Before adding ports to the newly defined LAG, use this command to determine
the logical ID that identifies the LAG to use when associating a port with it.
port-channel name Rename a designated LAG, or enter one name for all configured LAGs.
show port-channel Display the configured LAG names and their IDs. The interface number is
specified in logical slot/port format, which displays one (1) as the slot number;
the port number is a sequential integer, based on existing LAG numbers when
the new LAG is created.
Before adding ports to the newly defined LAG, use this command to determine
the logical ID that identifies the LAG to use when associating a port with it.
addport Add a port to a LAG. Ports added to a LAG must be physical ports, not other
LAGs.