Filter
Top Products
set gmrp interfacemode
SFTOS Command Reference for the S2410, Version 2.4.1.0 233
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a
port-channel (LAG), GARP functionality will be disabled on that interface. GARP
functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG)
membership is removed from an interface that has GARP enabled.
Default
disabled
Syntax
set gmrp interfacemode
Use no set gmrp interfacemode to disable GARP Multicast Registration Protocol on a
selected interface. If an interface that has GARP enabled is enabled for routing or is enlisted
as a member of a port-channel (LAG), GARP functionality will be disabled on that interface.
GARP functionality will subsequently be re-enabled if routing is disabled and port-channel
(LAG) membership is removed from an interface that has GARP enabled.
Mode
Interface Config
set gmrp interfacemode all
Command
History
show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for
one or all interfaces.
Syntax
show gmrp configuration {unit/slot/port | all}
Mode
Privileged Exec and User Exec
Interface—This displays the unit/slot/port of the interface that is described in this row of the
table.
Join Timer—Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is
an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100
centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
granularity of specification is 1 centisecond (0.01 seconds).
Version 2.3
Changed to
gmrp interfacemode all.