Filter
Top Products
172 Security Commands
dot1x port-control
Default
2
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
dot1x port-control
This command sets the authentication mode to be used on the specified port. The control
mode may be one of the following.
Force-unauthorized—The authenticator PAE unconditionally sets the controlled port to
unauthorized.
Force-authorized—The authenticator PAE unconditionally sets the controlled port to
authorized.
Auto—The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Syntax
dot1x port-control {force-unauthorized | force-authorized | auto}
Use no dot1x port-control to set the authentication mode to be used on the specified port
to
auto.
Default
auto
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
dot1x port-control all
This command sets the authentication mode to be used on all ports. The control mode may be
one of the following.
Version 2.3 Interface Range mode added
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
Version 2.3 Interface Range mode added
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode